|Terms of Trade:||FOB,EXW|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||5 Days|
Model No.: ZHDV40-12V
The 40 watt led driver circuit is a highly reliable, 120VAC input voltage constant voltage mode led Power Supply. The 12V Dimmable voltage LED driver is a UL8750 class 2 rated and designed to meet US Level VI energy efficiency standards, up to efficiency of 90% and higher. Featuring high PFC more than 0.95 and provides outstanding led dimming peformance, the led driver is the ideal solution to provides customers with high quality and safety Power supply for LED equipments.
． Dimmable with any standard MLV/Incandescent TRIAC (Leading edge) dimmer switch
． Super compact ALUMINUM CASE
． UL8750, Class 2
． Nema 3R - Outdoor Use
． Auto-Reset Protection for input/output overvoltage protection, input/output overcurrent protection, over temperature
protection, over power protection and short circuit protection
Input Voltage 120V AC
Output Voltage 12V DC
Operating Temperature -20℃-45℃(-4℉-101℉)
Mode Constant voltage
Dimensions (inch) 6.97"×2.76"×1.38"
12/24-Volt DC Installation Guide
Highly efficient, stabilized, constant voltage DC power of LED lighting
- This driver is to be installed in accordance with Article 450 of the National Electric Code and installed by qualified and professional electrician;
- Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
- Power must be disconnected at all times during installation.
- Observe polarity of the 12/24-volt DC output. Failure to observe polarity could damage LED lighting.
- Total wattage of all LED fixtures used must not exceed the maximum watt rating of the power supply.
Input Connections / Grounding
- Use the clamp connectors to secure cords and wires.
- Route and secure wires so they will not be pinched or damaged.
- All wiring must be in accordance with national and local electrical codes, low voltage Class 2 circuit. For wire runs inside of walls, use properly certified CL2 or better cabling and appropriate mounting hardware. If you are unclear as to how to install and wire this product, contact a qualified electrician. Failure to install this device properly may result in electrical shock or fire.
- Do not install Class 2 low voltage wiring in the same runs as AC main power. If AC and low voltage wires cross, keep them at 90-degree angles.
- The driver case MUST be grounded in accordance with the N.E.C. Connect the ground wire to the driver green wire.
- Bring the wires of the light fixture through the other clamp connector and connect them to the driver wires - positive to the red (+) wire and negative to the blue (-) wire
OEM package 20 495 x 420 x 170 199 x 90 x 75 0.72 16.5
ZHEN HUAN GROUP LIMITED (Shenzhenshi Zhen Huan Electronic Co., Ltd.), was founded in 2008, is the executive director of the Institute of China Power Supply unit, set product development, manufacturing, sales and service in one. We focus on switching Power supply, AC/DC power adapter, Li-ion Battery Charger, LED power supply, Dimmer LED driver, Transformer and so on. The company products of power from output 3W to 200W (output voltage 4.2V to 48V, output current 0.3A to 15A) a total of 500 kinds of models that can satisfy the demands for different types of consumer electronic devices.
ZhenHuan Electronic strives to bring low cost, fast delivery production to the world. We are committed to minimizing adverse impacts and improving process efficiency in accordance with legislation & ISO 9001. It has provided the opportunity to not only sell but also manufacture high quality, energy efficient power supplies to internationally recognised standards. ZhenHuan Electronic is required to meet different power supply requirements of scores of industries with a number of automatic production line and excellent testing equipment, for the production of high quality products to provide a reliable guarantee.
ZhenHuan Electronic strives to meet the various safety and quality standards that are recognised across the world. The process requires stringent checks and testing conducted by both the in-house teams and approved test houses. Most of its external ac to dc power supply upgrade to UL/cUL 1310 standards; UL/cUL 8750 standards; UL/cUL, CE, TUV(GS), RCM(SAA + C-TICK) 62368-1 standards; KC/KCC 60950 standards; CB 61558 standards; EMC, FCC, RoHS, CCC, PSE safety marks and other international certifications, ZhenHuan Electronic can provide the best and most consistent products for all power solutions.
ZhenHuan Electronic has developed technologies that further reduce energy wastage, resulting in products which are up to 90% efficient. Our goal is to continue to develop such products and sell the benefits to our customers. ZH POWER changes because of you.